Mount your custom metal logo sign perfectly with the included paper template and basic hand tools.
Tape the included paper template to the wall, level it, then drill pilot holes at the marked points. Remove the template, insert each letter or logo piece into its holes, and press firmly with your palm. The whole job takes a level, tape measure, and a drill.
Every Metal Logos & More sign ships with a full-size paper installation template, so precise placement requires only a few common tools. Gather a level, tape measure, masking tape, and a drill fitted with 1/16-inch and 5/64-inch bits. With these in hand, most signs mount in under an hour without professional help, making ours among the easiest custom metal signs in the business to install.
Pin mounting is the standard method for our dimensional metal letters and logos. Tape the template to the wall, center it with a level, and drill a pilot hole at every marked position. Peel away the template, slide each letter or logo piece onto its mounting pins, and push it all the way in using the palm of your hand. The pins seat flush for a clean, gap-free finish that looks professionally hung.
For a floating, dimensional look or installation on harder surfaces, we offer standoff and threaded-stud hardware. Pre-drill each marked hole with a 1/16-inch bit, insert plastic anchors, then enlarge the anchor holes with a 3/16-inch bit. Thread the studs into the back of the sign, align it to the wall, and press firmly. Standoffs add depth and shadow that elevate exterior facades and lobby walls alike.
Every DIY metal sign kit project from Metal Logos and More is custom quoted rather than priced from a set list. The final quote reflects sign size, material choice, finish, mounting method, and installation requirements, so no two projects price identically. Quotes are free, and most quote requests receive a response within 24 hours once artwork is uploaded.
Planning a signage project? Upload your logo for a free quote or call 866-668-5646.Yes. Our signs are engineered for DIY installation. The included paper template, paired with a level, tape measure, and a basic drill, lets most customers mount their sign in well under an hour with no special skills required.
Have a project in mind? Contact us or call 866-668-5646 for a free quote.Pin mounting uses small pilot holes that leave minimal marks, and the method supports damage-free removal if you ever relocate. For exterior or harder surfaces, plastic anchors and threaded studs provide a secure, long-lasting hold.
Want exact numbers for your sign? Upload your logo for a free quote or call 866-668-5646.Every order includes a full-size paper template that shows the exact drilling positions for level, centered placement. We recommend saving the template so you can reposition or re-mount the sign in the future.
Curious what your design would cost? Contact us or call 866-668-5646 for a free quote.Upload your logo for a free quote, or call 866-668-5646.
